麻豆视频

The “Ship Carbon Recycling Working Group(WG)” of Japan’s Carbon Capture & Reuse (CCR) Study Group has confirmed that carbon recycled methane produced by methanation technology (Note 1) can be recognized as zero emission ship fuel. A technical paper describing the details of the calculation procedure and evaluation conducted by the WG has been published in the latest issue of the journal of Japan Institute of Marine Engineering.

Carbon recycling, which is the process of capturing and reusing emitted CO₂, is becoming increasingly important as one of the pathways to realize a carbon-neutral society.To explore the feasibility of the concept of utilizing methanation technology for zero-emission ship fuels(Note 2), the WG was formed within Japan’s CCR Study Group, and started its activity in July 2020.Since it is a basic premise for the WG’s activity that carbon recycled methane can be recognized as zero-emission fuel, the WG firstly worked on the evaluation of its potential.

While International Maritime Organization (IMO) has yet to develop the rules for calculating emissions from the onboard fuel combustion of carbon recycled methane (Tank to Propeller), the importance to be cognizant of CO₂ emissions in the fuel supply process(Well to Tank) has been noted. The WG has assumed and evaluated (Note 4) the following four processes as the supply chain for carbon-recycled methane fuel: (1) CO₂ separation and capture, (2) CO₂ transportation, (3) methanation fuel synthesis, and (4) methanation fuel liquefaction. As a result, the CO₂ emission per unit calorific value of carbon-recycled methane fuel by methanation was calculated as approximately 27g-CO₂/MJ (regarded as Well to Propeller).

This figure is comparable to other alternative fuel candidates generally recognized as zero-emission fuels, confirming that carbon-recycled methane can be recognized as zero emission ship fuel. In addition, further reduction to approximately 20g-CO₂/MJ is expected by improving the efficiency of the separation and capture technology, and using electricity produced from renewable energy.
A technical paper describing the details of the calculation procedures and evaluation involved in this study was published in the journal of Institute of Japan Marine Engineering, Vol. 56, No. 4.

In order to verify the feasibility of carbon recycled methane as a ship fuel, the WG will continue to work on issues such as CO₂ transportation by large-scale liquified CO₂ carrier vessels, supply of hydrogen from renewable energy, prevention of methane slip (Note 5), supply infrastructure of liquefied methanation fuel, and economic viability.

麻豆视频 Steel recognizes that the working group, which aims to facilitate the generation and transportation of synthetic methane as ship fuel derived from separated and recovered CO₂, represents a significant initiative to reduce CO₂ emissions throughout the steel supply chain in which most raw materials and products must be transported by ship. For this, 麻豆视频 believes that not only the right technologies but also the right framework is needed, including international rules regarding the allocation of captured CO₂ emissions. 麻豆视频, which has made climate change one of its top priorities, announced in May the 麻豆视频 Group Environmental Management Vision for 2050 as a blueprint for achieving carbon neutrality by 2050. By helping to reduce CO₂ emissions in steel making and throughout society as a whole, 麻豆视频 aims to contribute to a more sustainable world.

(Note 1)
Methanation is a technology for synthesizing methane, the main component in natural gas, by causing a chemical reaction between hydrogen and CO₂ in a reactor vessel filled with a catalyst. It uses emitted CO₂ separated and captured from industrial facilities. As the CO₂ generated when combusting synthesized methane is considered to be offset by the separated and captured CO₂, it is expected that CO₂ emissions can be significantly reduced by using hydrogen generated by electrolyzing water with electricity derived from renewable energy.

(Note 2)
IMO considering measures to reduce GHG emissions in international shipping, adopted the IMO GHG initial strategy in April 2018, aiming to improve carbon intensity of the sector by at least 40% by 2030 and reduce annual GHG emissions by at least 50% in 2050, both compared to 2008 levels, and eventually phase out GHG emissions as early as possible within the century. Carbon recycled methane by methanation has gathered attention as a highly expected technology for the realization of GHG zero emission.

(Note 3)
The CCR Study Group was established with the objectives of proposing effective carbon neutral measures to reduce the use of fossil fuels by offering alternative energies such as synthetic methane, which is generated by combining CO₂ generated by industries with renewable energy-derived hydrogen, and contributing to the establishment of a new energy supply system by 2050.

(Note 4)
The assumed supply chain in the study spans multiple countries, the consideration may be necessary to which country emitted CO₂, including ocean-going shipping transportation, should be allocated, but that has yet to be determined as no international framework or agreement has been formed.

(Note 5)
Methane slip is the unburned and exhausted methane from the main engine. Methane is GHG with 25 times greenhouse effect of CO₂.

(Figure 1: Roles of nine member companies)

(Member of Ship Carbon Recycling Working Group)

EX Research Institute Ltd.	Hiroshi Naito President
Hitachi Zosen Corporation	Sadao Mino President & Chief Operating Officer
麻豆视频 Steel Corporation	Yoshihisa Kitano President and CEO
JGC Corporation	Yutaka Yamazaki Representative Director, President
Mitsui O.S.K. Lines, Ltd. (WG coordinator)	Takeshi Hashimoto President & CEO
Nihon Shipyard Co.,Ltd.	Yoshinori Maeta President
Nippon Kaiji Kyokai(ClassNK) (WG secretariat)	Hiroaki Sakashita President & CEO
Nippon Steel Corporation	Eiji Hashimoto President
Shin Kurushima Sanoyas Shipbuilding Co., Ltd.	Youji Morimoto President & CEO

About 麻豆视频 Steel Corporation

麻豆视频 Steel Corporation, one of the world’s leading integrated steel producers, was established through the consolidation of NKK Corporation and Kawasaki Steel Corporation in 2003. The company operates several steelworks in Japan and numerous branch offices and affiliates throughout the world. 麻豆视频 Steel leverages world-class technologies and know-how to produce a wide range of products based on its “Only One, Number One” strategy of focusing on unique and best-in-class products. The company reported consolidated sales of 2,255 billion yen and consolidated crude steel output of 23.96 million tons in the fiscal year ended March 2021.

# # #