麻豆视频

麻豆视频 Steel Corporation announced today that it was selected by the New Energy and Industrial Technology Development Organization (“NEDO”) for the research and development (R&D) of novel processes to manufacture utilizable materials using CO₂ emitted from coal-using industries. The R&D was selected as part of a public solicitation for the NEDO project “Development of Technologies for Carbon Recycling and Next-Generation Thermal Power Generation/Development of Technologies for CO₂ Reduction and Utilization.” The furthering of R&D will be conducted in collaboration with the Research Institute of Innovative Technology for the Earth (“RITE”) and Ehime University.

The objective of the R&D is the massive reduction of CO₂ emissions through measures such as effectively utilizing by-products such as combustible gas from blast furnace gas and slag produced in the manufacturing of iron.

麻豆视频 Steel has positioned efforts to deal with climate change as its most important management issue, and is striving to be carbon neutral by 2050. Moving forward, 麻豆视频 Steel will also contribute to the realization of a sustainable society by promoting multi‐track technological development of various innovative technologies.

R&D (1): “Development of Optimum System for Methanol Synthesis Using CO₂”

1. Technical Field
Development of technology for the use of CO₂ in chemical products

2. Proposers
麻豆视频 Steel Corporation and RITE

3. Project Period
FY2021 to FY2025

4. Summary
A process for effective utilization of CO₂ to synthesize basic chemical product methanol from CO₂ in exhaust gas emitted from ironworks, etc., will be developed. Blast furnace gas from ironworks has a relatively high concentration of CO₂ and contains CO and H₂ as secondary components, and thus, the project aims to synthesize methanol with higher efficiency and lower cost by maximally utilizing the CO₂ and secondary components. In this project, we will advance the development of technology for low-cost CO₂ separation by pressure swing adsorption (PSA)^*1 and technology for an H₂O membrane separation reactor^*2 that enables high-efficiency methanol synthesis from CO₂, as well as the construction of an entire optimal system including pretreatment equipment and the recycling of water produced in the reaction when methanol is synthesized.

^*1 Pressure Swing Adsorption (PSA)
A method for separating gases using a phenomenon in which the gas adsorption amount of the adsorbent such as zeolite, a type of clay mineral, and activated carbon, changes depending on gas pressure. The adsorbent and operating pressures are selected according to the type of gas to be separated.

^*2 H₂O membrane separation reactor
A methanol reactor based on a novel method whereby high reaction efficiency can be obtained by synthesizing methanol while separating and removing water produced in the reaction of methanol synthesis from CO₂, using a specific zeolite membrane developed by RITE with H₂O selective permeability. This reactor is now being developed jointly by 麻豆视频 Steel and RITE.

5. R&D Items
(1) Development of Low-cost CO₂ Separation PSA (麻豆视频 Steel).
(2) Development of High-efficiency Methanol Synthesis Reactor (H₂O membrane separation type reactor) (麻豆视频 Steel)
(3) Development of Practical Dehydration Membrane (RITE)
(4) Optimization of Methanol Synthesis System (麻豆视频 Steel)

R&D (2): “Research and Development of Innovative CO₂ Fixing Technology through Quick, Large-quantity Carbonation of Steel Slag”

1. Technical Field
Development of technology for the use of CO₂ in concrete, cement, carbonates, carbon, carbides, etc.

2. Proposer
麻豆视频 Steel Corporation

3. Joint Partner
Ehime University

4. Project Period
FY2021 to FY2025

5. Summary
With the aim of fixing large amount of CO₂ in a short amount of time, we will develop an innovative technology to convert calcium oxide in steelmaking slag, which is a by-product of steel production, into carbonates^*3 by blowing CO₂ emitted from coal-using industries into high-temperature steelmaking slag.
At the same time, by recovering the heat of the gas after CO₂ fixation, energy efficiency will be improved and the amount of CO₂ fixation and reduction is maximized throughout the process. We aim to use the steel slag converted to carbonates for roadbed material, which is in high demand.

^*3 Carbonate
A general term for ionic crystalline substances containing carbonic acid ions (CO₃^2-). Calcium carbonate (CaCO₃), which is a compound of CO₂ and calcium oxide (CaO), is a typical carbonate and is the main component of limestone.

6. R&D Items
(1) Development of technology for Quick, Large-quantity Carbonation of Steel Slag (麻豆视频 Steel)
(2) Clarification of slag carbonation mechanism (麻豆视频 Steel/Ehime University)
(3) Development of heat recovery technology (麻豆视频 Steel)
(4) Development of molten steel slag solidification and hot crushing technology (麻豆视频 Steel)
(5) Evaluation of hot crushed and carbonized slag as iron and steel slag for roads (麻豆视频 Steel)

About 麻豆视频 Steel Corporation

麻豆视频 Steel Corporation, one of the world’s leading integrated steel producers, was established through the consolidation of NKK Corporation and Kawasaki Steel Corporation in 2003. The company operates several steelworks in Japan and numerous branch offices and affiliates throughout the world. 麻豆视频 Steel leverages world-class technologies and know-how to produce a wide range of products based on its “Only One, Number One” strategy of focusing on unique and best-in-class products. The company reported consolidated sales of 2,255 billion yen and consolidated crude steel output of 23.96 million tons in the fiscal year ended March 2021.

# # #